9. REC OUTPUT
Unbalanced line level output for connection to external link. The output level is independent of master volume.
10. AC INPUT TERMINAL
Supply of 220 ~ 240V ac via fused IEC connector.
13. MIC / LINE INPUT JACK
Ch.2 to 4 are inputs for mic signal ( balanced )
11. RCA JACK
For unbalanced line input sources such as CD player, etc.
14. PHANTOM POWER SWITCH
12V DC phantom power is available for input channel 2, which is suitable for connection to condenser
microphones. For normal mic inputs, it is recommended that the phantom power feature is turned off.
Ensure suitable condensor microphone is used which could operate at 12V DC.
12. MIC / LINE LEVEL SWITCH FOR CH 4
Inputs to the unit can be either mic or line level. Select the required input type by using these switches and plug the
input source to the appropriate jack. Stereo phone jack for balanced mic input whereas the RCA jack is for music
source unbalanced line input. It is recommended that at any one time, only one type of input source is connected
to the amplifier.
Page 3
MC2000 Series | Basic Mixer Amplifier
Parts Identifications
