Setting Up
The unit has to be setup prior to operating, and can be done via the front panel setup menu or via a notebook. To
enter setup menu, press ENTER / MENU button, and the following main menu shall appear.
1.0 TIME / DATE
SETTING
2.0 PRG.SCHEDULE
SETTING
3.0 SCHEDULE
CHECK
4.0 MANUAL TRIG
ON / OFF
5.0 CASCADE
6.0 FACTORY
RESET
7.0 SYSTEM
Use the NEXT
and PREV
button to toggle
between the
main menu. To
select, press
MENU/ENTER
button
To set the current time, date and day of the week of
the unit
To set the triggering time and the corresponding
channel of up to 250 memories.
To check the preset memories
To manually trigger the channel relay port
Cascade setup if more than one PT1800 is used, ie.
if memories required are more than 250
To erase all settings and return the parameters to
factory default
System update & bootloading
8.0 EXIT
To exit from the setup menu
PAGE 6
PT1801 | MULTICHANNEL PROGRAMMABLE TIMER
