Setting Up ( Con’t )
3.0 SCHEDULE CHECKS
This menu shall be used to check the setup times.
3.0 SCHEDULE
CHECK
- Use NEXT/PREV button to select the schedule number.
- Press ENTER to confirm selection
Enter
3.1 Sche. 001/250
CH.0 (Skip)
- The selected schedule number, eg. 003 is selected, the time of trigger is shown
- Press ENTER to view other parameters.
Enter
3.1 Sche. 003/250
Time : 08h ; 30m : 00s
- The triggering shall occur at every day.
- Press ENTER to continue. DW = Day of Week
Enter
3.1 Sche. 003/250
DW : M,T,W,T,F,S,S
- To exit the current selection, press ENTER
- Menu shall return to 3.0
- To view other schedules, repeat the same steps above
Enter
3.1 Sche. 007/250
Exit
The output channel can be triggered manually, overriding the scheduled activation. It can be ON (relay closed ),
OFF (relay open) or Pulse.
4.0 MANUAL TRIGGERING
4.0 MANUAL TRIG
ON / OFF
- Use NEXT/PREV button to select the channel number
- Press ENTER to confirm the selected channel
Enter
4.1 Manual Trig.
CH1 = off
- Use NEXT/PREV button to select the triggering mode
- Press ENTER to confirm the selection. LED for the channel shall on if the selection is
ON and vice versa.
Enter
4.1 Manual Trig.
CH2 = off
- The menu shall return as 4.1, use NEXT / PREV to select the channel number .
Enter
4.1 Manual Trig.
CH2 = off
- Select exit to return to menu 4.0
Enter
4.1 Manual Trig.
Exit
PAGE 9
PT1801 | MULTICHANNEL PROGRAMMABLE TIMER
3.1 Sche. 003/250
Date : 00d : 00m : 00y
Enter
- The selected schedule number, eg. 003 is selected, the date of trigger is shown
- Press ENTER to view other parameters.
