background image

Page 7

SQ9715 SEQUENTIAL POWER SWITCHER

WARNING - When using electric products, basic precautions should always be followed including the followings :

1.  Read all the SAFE INSTRUCTIONS before using the product.
2. This product must be earthed. If it should malfunction or breakdown, grounding provides a path of least resistance for 

electric current to reduce risk of electric shock.
This product is equipped with a cord having an equipment grounding conductor and a grounding plug.

The plug must be plugged into an appropriate outlet that is properly installed and earthed in accordance with all local codes 

and ordinance.
DANGER - Improper connection of the equipment-grounding connector can result in a risk of electric shock. Check with a 

qualified electrician or servicemen if you are in doubt as to whether the product is properly grounded. Do not modify the plug 

provided with the product, It it will not fit the outlet, have a proper outlet installed by a qualified electrician.
3.  To reduce the risk of injury, close supervision is necessary when the product is used near children.
4.  Do not use this product near water, for example, near a bathtub, washbowl, kitchen sink, in a wet basement or near a 

swimming pool or the like.
5.  This product should be located so that its location or position does not interfere with its proper ventiallation.
6.  This product should be located away from heat sources such as radiators, heat registers or other products that produce 

heat.

7.  This product should be connected to a power supply only of the type described on the operating instructions or as marked 

on the product.

8.  This product may be equipped with a polarised line plug (one blade wider than the other). This is a safety feature. If you 

are unable to insert the plug into the outlet, contact an electrician to replace your obsolete outlet. Do not defeat the safety 

purpose of the plug.

9.  The power supply cord of the product should be unplugged from the outlet when left unused for a long period of time. 

When unplugging the power supply cord, do not pull on the cord, but grasp it by the plug.

10. Care should be taken so that object do not fall and liquid are not spilled into the enclosure through openings.

11. The product should be serviced by a qualified service personnel when :

     a.  The power supply cord or the plug has been damaged or,

     b.  Objects has fallen, or liquid has been spilled into the product, or

     c.  The product has been exposed to rain, or

     d.  The product does not appear to operate normally or exhibits a marked change in

          performance, or

     e.  The product has been dropped or the enclosure damaged.

12.  Do not attempt to service the product beyond that described in the user-maintenance instructions. All other serving should 

be referred to qualified service personnel.

13.  WARNING - do not place objects on the products' power cord or place it in a position where alone could trip over, walk on 

or  roll  anything  over  it.  Do  not  allow  the  product  to  rest  on  or  to  be  installed  over  power  cords  of  any  type.  Improper 

installations of this type create the possibility of fire hazard and / or personal injury.

Important Safety Instructions

The  lightning  flash  symbol  with  arrowhead  within  an  equilateral 

triangle is intended to alert the user to the presence of uninsulated 

"dangerous  voltage"  within  the  product's  enclosure,  that  may  be 

sufficient magnitude to be a risk of electric shock to persons.

The exclamation mark within an equilateral triangle is intended to alert 

the  user  to  the  presence  of  important  operating  and  maintenance 

(servicing) instructions in the literature accompanying the appliance.

THIS UNIT MUST BE EARTHED

RISK OF ELECTRICAL SHOCK

WARNING !

DO NOT OPEN

Summary of Contents for SQ9715









Reviews: