background image

This product carries a five year parts and labour warranty from date of 
shipment from Ampetronic. To qualify for the five year warranty, the product 
must be registered at www.ampetronic.co (products/warranty), without which 
the warranty will be valid for two years only.
The warranty could be invalidated if the instructions in this handbook are not 
followed correctly, or if the unit is misused in any way. 

Manufacturer: 

Ampetronic Ltd.,
Unit 2, Trentside Business Village 
Farndon Road 
Newark 
NG24 4XB

Declares that the product:

Description:

Induction Loop Driver

Type name:

CLD1-AC

conforms to the following directive(s and Norm(s):

2014 / 35 / EU

                  The Low Voltage Directive (LVD)

                                                           and its amending directives

2014 / 30 / EU

                  The Electromagnetic Compatibility Directive (EMC)

                                                           and its amending directives

2014 / 53 / EU

                          The Radio Equipment Directive (RED)

                                                           and its amending directives

2011 / 65 / EU

                          The RoHS Directive

                                                           and its amending directives

I

 hereby declare that the equipment named above has been designed to 

comply to with the relevant sections of the above specifications. The unit 

complies with all essential requirements of the Directives.

Date: June 2019
J.R. Pieters
Managing Director
Ampetronic Ltd.

WARRANTY

 

DECLARATION OF CONFORMITY

UP16501-9

Summary of Contents for CLD1-AC









Reviews: