Amphenol Telect 009-7001-0104B Installation Manual Download

Page: 4 / 15

Amphenol Network Solutions

509.926.6000 — amphenol-ns.com.com

High-Current

Demarcation Panel

1.1 Overview

The Amphenol Network Solutions 009-7001-0104B demarcation fuse panel with alarms provides TPS/TLS fuse or

circuit breaker protection at the equipment interface. The low-profile, white panel supports four TFD fuse holders

or circuit breakers, a replaceable alarm card containing power and alarm LEDs, alarm contact relays, rear-access

terminals and wire-wrap alarm relay contacts. Each fuse holder has separate BATT/RTN inputs and outputs rated

up to 125A for either 24 VDC or 48 VDC applications.

The 009-7001-0104B-TFD model comes with TFD fuse holders installed in each position.

Hardware is included for either flush or extended mounting in a 19-inch or 23-inch relay rack. Visit our website

(amphenol-ns.com) for ordering accessories and replaceable parts: fuses (up to 125A, each), TFD fuse holders,

circuit breakers (up to 100A) and more.

1.2 Inspection

Please read and understand all instructions before installation. If you have questions, contact Amphenol Network

Solutions Technical support at support@amphenol-ns.com or call 509-926-6000.

When you receive the equipment, carefully unpack it and compare it to the packaging list. Please report any

defective or missing parts to Amphenol Network Solutions Quality at quality@amphenol-ns.com or call 509-926-

6000.

Amphenol Network Solutions is not liable for transit damage. If the product is damaged, please report it to the

carrier and contact Amphenol Network Solutions Quality.

NOTE: For service or warranty information, please visit amphenol-ns.com and click on the support tab, email

Amphenol Network Solutions at getinfo@amphenol-ns.com or call us at 509-926-6000.

Amphenol Network Solutions assumes no liability from the application or use of these products. Neither does

Amphenol Network Solutions convey any license under its patent rights or the patent rights of others. This

document and the products described herein are subject to change without notice.

Front with TPS fuses

Rear without I/O terminal covers

Fig. 1: Model 009-7001-0104B-TFD (UL Listed, File E139903)

Summary of Contents for 009-7001-0104B
















Search results

Summary of Contents for 009-7001-0104B

Reviews:

Related manuals for 009-7001-0104B

Brands by name

Popular brands

Amphenol Telect 009-7001-0104B, Installation Manual

Search results

Summary of Contents for 009-7001-0104B

Reviews:

Related manuals for 009-7001-0104B

Brands by name

Popular brands