Ampler – Stout, Stellar, Curt
33
Before the first ride
Switch off the Pedelec.
Power button is off (not lit).
1. Press and hold the power button.
2. The LED lights up green.
3. The light switches on.
4. Release the power button.
y
To switch the motor back on, select assistance mode or switch the Pedelec off and on again.
6.4 Charging the battery with the charger
The factory charge level of the battery is between 40% and 90%.
It is best advised to store the charger indoors.
Read and follow the safety instructions for the battery and the charger.
Before recharging
After a ride in the cold, give the Pedelec some time to acclimatise ("warm up") before charging the battery.
Use the charger indoors only.
Ensure that the charging port on the Pedelec and the charging plug and mains plug of the charger are clean, dry and free from
metallic objects and debris.
The charging process must be carried out in a dry and not too cold environment, but always at least above 0 °C or at room
temperature.
Charging the battery
1. Allow the Pedelec and charger to acclimatise to the ambient temperature, if necessary.
2. Insert the magnetic charging plug into the charging socket on the left side of the seat tube.
3. Insert the mains plug of the charger into the mains socket.
y
The charging LED on the charger lights up
red
.
y
The charger charges the battery. The full charging time is approx. 2.5 hours.
y
The charger stops charging automatically when the battery is fully charged.
y
As soon as the charging LED on the charger lights up green, the battery is fully charged.
4. Unplug the charger from the mains socket.
5. Unplug the magnetic charging plug from the charging socket on the left side of the seat tube.
Summary of Contents for Curt 2021
