Ampler Curt 2021, Manual

6

Safety instructions

Ampler – Stout, Stellar, Curt

2  Safety instructions



Read and carefully follow the instruction manual.



Keep the instruction manual in a safe place.



Read, follow and save all supplied instruction manuals for  

components and accessories.



Please pass on the instruction manual and all user manuals 

when handing over the Pedelec.

2.1  Pedelec

2.1.1  Intended use

The Pedelec is intended for private use as an electric motor-

assisted bicycle in urban and countryside areas on publicly 

accessible, paved paths.  



Only use the Pedelec, components and accessories in  

accordance with the information in this instruction manual.

y

Please adhere to the manufacturer's instruction manuals for 

the Pedelec's components and accessories.



Do not modify the Pedelec, its components or accessories in 

an unauthorized manner.



Only use approved original spare parts for replacement, 

exchange, maintenance or repair.



Replace, service or repair of components only as specified in 

this manual and, if necessary, after contacting Ampler Customer 

Service.

2.1.2  Non-intended use

The Pedelec is 

not

 intended for use as a mountain bike or racing 

bike. 



 Avoid non-intended uses:

The following are considered as non-intended use:

y

Renting the Pedelec at unattended rental stations

y

Exceeding the permissible total weight of the Pedelec

y

To use the Pedelec without reflectors fitted in accordance 

with locally applicable regulations

y

Adjusting the seat post beyond the minimum insertion 

depth in the seat tube

y

Using the Pedelec with inadequately tightened,  

under-tightened or over-tightened stem clamping bolts

y

To use the Pedelec with incorrectly mounted pedals

y

Using the Pedelec with underinflated or overinflated tyres

y

Disregarding the required inspection and maintenance 

schedules

y

Overtightening of fasteners during assembly, adjustment 

or maintenance

y

Use of non-original spare parts

y

Connecting the charger to a damp or wet charging port

y

Charging the battery outdoors

y

Inappropriate disposal of the Pedelec, its components and 

accessories

2.2  Battery charger

The battery charger is not intended for use by persons  

(including children) with reduced physical, sensory or mental 

capabilities, or lack of experience and knowledge, unless they 

have been given supervision or instruction concerning use of 

the charger by a person responsible for their safety.



Do not let children play with the battery charger.



Use only the charger intended for the corresponding Ampler 

bike when charging the battery in the Pedelec with the  

charging connection.

2.3  Other hazards

Riding without a bike helmet

Serious injuries and fatalities induced by accidents! 

Riding without a bicycle helmet can lead to serious head  

injuries in the event of a crash or fall.



Always wear a correctly adjusted and fitting bicycle helmet 

when riding.



Follow the manufacturer's manual.

Loose components of the Pedelec

Loose components that can lead to hazards include:

y

Saddle and seat post

y

Handlebars

y

Pedals

y

Wheels

y

Rear carrier

Falls and very serious injuries can be caused by parts of the 

Pedelec coming loose!

Lose oder zu gering angezogene Schrauben, Mutter und  

Loose or under-tightened screws, bolts, nuts and fastenings lead 

to loose, slipping components (loose 

handlebars, slipping seat 

posts, loose saddles, wheels slipping out of the fork, loose  

pedals) and can

 lead to loss of stability and balance when riding.



Always comply with the torque specifications or instructions 

for the correct tightening of bolts and nuts on the headset, 

stem, handlebars, saddle and seat post, wheels and axles.



Follow the instructions for the correct installation of the 

pedals.



Note the information on the minimum insertion depth of the 

seat post.