Ampler – Curt
10
Safety instructions
Metallic objects could cause a short circuit in the charging port
on the frame of the Pedelec. This may cause electrical arcing.
Do
not
insert or plug any metallic objects (bolts, coins, wires,
keys, brushes or similar) into the charging port on the frame
of the Pedelec.
Damage to the Battery!
The battery cells can be damaged if they are left permanently
undercharged (flat) during prolonged periods of non-use.
Check the state of charge of the battery regularly and charge
the battery if necessary.
Damaged, overheated charger
Fire hazard!
The charger heats up when charging the battery and can
become very hot.
When charging, do
not
place the charger on easily flammable
surfaces or materials and do
not
place it near flammable or
explosive materials.
Do
not
cover the charger while charging.
Do
not
leave the charger unattended while charging.
Protect the charger from excessive heat or high temperatures.
Discomfort to the body and hands!
The charger can become very hot when charging the battery.
Do
not
touch the charger when the casing is very hot.
Place the charger in a well-ventilated location.
Electric shock!
A damaged charger may have defective plugs, power cables
and buttons.
Only operate the charger if it is in good working condition,
and only use it for charging.
Before each use, check the external condition of the plugs,
sockets, power cables and buttons of the charger. Ensure
that the charging socket and the mains plug of the charger
are
not
in contact with any metallic objects.
Do
not
use a damaged charger.
Electric shock due to a short circuit!
If water enters the charger, a short circuit may occur, which
can lead to an electric shock.
Store the charger in a cool and dry place.
Protect the charger from rain, snow, moisture and humidity.
Do
not
immerse the charger in water.
Condensation on the charger and charging ports
Electric shock due to condensation!
If there is a sharp change in temperature, condensation can
form on and within the charger and at the charging port.
If significant temperature changes occur in the local setting,
do
not
use the charger until it has adapted sufficiently to
the ambient temperature.
Do
not
use the charger and charging port if there is
moisture or water on the housing.
Check the charger, the plug and the charging port for
moisture before use, and wipe dry if necessary.
