3
Ampler – Curt
Table of Contents
6.1 Checking the Pedelec after assembly
22
22
22
6.2.2 Adjusting the lighting system (light beam of the front light)
23
24
6.3.1 Switching the Pedelec on and off
24
6.3.2 Selecting the assist mode
25
6.3.3 Switching the lights on and off
6.3.4 Charging the battery with the charger
28
7.1 Before your ride
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
28
7.1.1 Checklist "Before Every Ride"
7.1.2 Personal protective equipment
29
29
7.3 Before the first rides: perform "bedding-in" of the brakes
29
29
Cleaning, maintenance and care
30
32
Troubleshooting faults and errors
39
10.2 Install and use the Ampler Bike App on a smartphone
10.3 Updating the Pedelec's firmware
10.4 Carrying out a calibration of the torque sensor