Ampler – Curt
42
Inspection and maintenance
11 Inspection and maintenance
Inspection and maintenance of the Pedelec can be carried out by any bicycle workshop.
Information on inspection and maintenance schedules:
11.1 Inspection schedules
Schedule
When?
First inspection
y
after 500 km or after approx. 6 weeks
Annual inspection
y
at least once a year
and
y
every 3000 km
Regular inspection
Recommendation: with frequent use (high mileage) at least 2 to 3 inspections per year:
y
before the start of the season
y
during the season
y
at the end of the season
12 Repair
Repairs to the Pedelec can only be carried out by a bicycle workshop or by Ampler Bikes and our Service Partners,
depending on the particular case.
Ampler Customer Service
always decides who can carry out the repair in each individual case.
J
Before making repairs: Contact
Ampler Customer Service
.
13 Decommissioning
If the Pedelec will
not
be used for a longer period of time (e.g. in winter), it should be decommissioned, or “put out of operation".
13.1 Decommissioning the Pedelec
1. Clean the Pedelec.
2. Charge the battery to approx. 40%–80%.
3. Check the state of charge regularly.
y
If necessary, recharge the battery to 40%–80%.
4. Store the Pedelec in a clean, dry place.
5. Follow the instructions for correct storage.
