Ampler – Curt
26
Before the first ride
Riding the Pedelec
Pedelec is switched on.
As soon as the crank is turned the motor starts to assist the pedaling depending on the selected mode.
The display automatically switches off while riding (screen goes off).
y
The display can be lit up by a short press on the power button. We recommend
not
to do this while riding.
y
When the Pedelec is moving slowly or standing still for a short while, the display shows the active trip statistics
1. Distance ridden since last switch-off
2. Trip duration
3. Average speed
y
The display then shows the active state.
The Pedelec only records odometer data when it is switched on.
Switching off the Pedelec (automatic switch-off)
After about 2.5 minutes of being idle (Pedelec is standing still and the power button was
not
pressed) the Pedelec automatically
switches off.
The Pedelec enters standby mode after 3 hours of being idle.
Switching off the Pedelec (manual switch-off)
Pedelec is switched on.
1. Press the power button and hold it.
y
The display shows the power off symbol.
2. Release the power button.
y
The display switches off.
y
The Pedelec switches off.
When the Pedelec is switched off the active trip will stop recording and a trip summary is shown before the display turns off.
1. Trip duration
2. Trip distance
3. Average speed
The trip statistics are automatically uploaded once GSM is active. You can find the trip history in the
Ampler Bike App
.
6.3.2 Selecting the assist mode
DANGER
Trying to press the power button while riding can cause an impairment of balance
Stop the ride to operate the power button.
Falls and crashes can occur when concentrating too much on the display operations while riding.
Keep the focus on the road ahead and your surroundings while riding.
The electric drive has two assist modes and a 0% assist mode:
y
Standard mode - 70% pedalling assistance
y
Max mode - 100% pedalling assistance
y
0% assist mode - motor is off, lights can be turned on or off separately
The assist mode is selected before starting the trip when the Pedelec is switched on. The system remembers the last selected mode.
