29
Ampler – Curt
Operation: riding the Pedelec
7 Operation: riding the Pedelec
In order to make the daily use of the Pedelec as problem-free as possible for all journeys, there are a few things to bear in mind:
1. Check the Pedelec before each ride using the "Before the ride" checklist.
2. Use personal protective equipment (e.g. a helmet).
3. Be aware of environmental conditions and special circumstances when riding a Pedelec.
Braking performance during the first few rides
The brake pads of the hydraulic disc brakes do
not
perform at their full braking potential at the first use. This means there
will be a longer braking distance and that the overall braking power will increase with use in the beginning.
Note that full braking power is
not
available during the first few rides and that it will increase until the brakes will reach
their full potential.
Environmental conditions
You are usually travelling at higher speeds with a Pedelec compared to a normal bicycle. This also means that the Pedelec reacts
differently to unfavourable environmental conditions: Wetness, rain, snow and ice, but also sand or dirt on the road as well as
different road surfaces can affect the steering when swerving at high speeds. Mind the longer braking distances or influence
of the handling of the Pedelec compared to a normal bicycle that you might be used to.
While riding pay attention to the respective environmental conditions and adapt your riding style accordingly.
Riding a Pedelec: braking and cornering
When riding a Pedelec, braking distances can increase due to typically higher speeds, especially when riding with luggage and
carrying weight.
When riding with a trailer, the handling of the Pedelec may change, especially in cornering and when braking.
When cornering, the exerted forces can be higher than what you are normally used to.
When riding with a trailer, carrying luggage or load and at high speeds, adjust your riding style to suit the conditions.
7.1 Before your ride
7.1.1 Checklist "Before Every Ride"
J
Carry out a visual inspection of the Pedelec and all accessories according to the checklist:
y
Are all accessories securely mounted and fastened?
Parts
What to do before each ride?
Brakes
J
Check the function of both brakes.
J
To do this, lift the front and rear wheels individually, spin them and apply the brakes as a test.
Drivetrain
J
Move both pedals manually.
Rechargeable battery
J
Check the state of charge of the battery.
Lighting system
J
Check the lighting system’s functionality.
J
Check reflectors: Securely attached? Clean?
Tires
J
Check the tire tread.
J
Check the condition of the sidewalls.
J
Check tire pressure, inflate if necessary.
