background image

12

V2.3 03.11.20

12

Beware that when you bike in the cold, the range and battery 
capacity will be lower than average. This is completely normal, and 
it won’t affect the battery’s overall state or lifespan.

•  When you fi nish cycling in the cold, make sure that the bike has 

time to warm up a little before you charge it.

Maintaining your Ampler bike is just like maintaining 
a regular bicycle and all professional bike shops can carry out the 
maintenance of our bikes. 

The fi rst professional check-up should take place after the fi rst 500 
kilometres – this will ensure that everything is working as it should. 
After that, have the bike service regularly every 3000 km. 

If you ride often and don’t count the riding distance, make sure to 
take it to a professional bike shop for maintenance at least twice 
every season, ideally even three times 

•  Before the start of the season
•  Mid-way through
•  At the end of the season. 

This way, all the important aspects like brake oil levels, and the 
condition of brake pads and tyres get checked, and the internal parts 
like the crank set and wheel hubs get cleaned thoroughly. 

That’s it – while it’s a long list of things to look out for, it’s good to 
remember that maintaining your bike often is important for both 
safety and ride experience reasons. 

Have fun riding!

Maintenance

Professional maintenance 
schedule

Summary of Contents for Stellar 2020



















Reviews: