5
V2.3 03.11.20
5
Assembly
Insert the pedals
1. The pedals are marked with
R
(right) or
L
(left). The R pedal goes
on the chainwheel side and the L pedal goes on the non-chain-
wheel side.
2. Tighten the pedals with the
6 mm hex key.
Pedals need to be tight so make sure you put some force into it.
Expect resistance only at the end of the thread, if the pedal is hard to
thread in from the beginning then the threads must be inspected.
L
R
left
right
1. Clamp the white front refl ector below the front light.
2. Attach the red rear refl ector to the bracket. Wrap the bracket
around the seat post and secure it with the screw.
3. Attach one orange refl ector on the front wheel, one on the rear
wheel. Pick a spoke, place the refl ector on the spoke and push the
clasp at the refl ector mount. Fasten it with a screwdriver.
Mount the refl ectors
