6
V2.3 03.11.20
6
The bike has made a long journey before reaching you, double-check
the following things:
1. Check the wheels. Spin the wheels and see if they run freely.
2. Check the tyres pressure and make sure the tyres are full before
your fi rst ride. You can always check the recommended tyres
pressure noted on the side walls of the tyres.
3. Test the brakes. Spin the front wheel and the rear wheel separately.
Apply the brake levers separately and make sure the brakes are
working correctly.
4. Check the drivetrain. Pedal by hand and check if the chain or the
belt drive runs freely. Shift the gears on the 10-speed bike.
5. Check your bike visually. Does everything seem alright?
Remember to check your bike occasionally and view our Ampler Bikes
Maintenance information.
Final check before your fi rst ride
Take the
4 mm hex key
and adjust the perfect seat height
1. Place the bike in a way that allows you to support yourself against
a wall when sitting on it.
2. Put one pedal in its lowest position.
3. Hop on and try to reach the pedal with your heel.
4. You have the perfect seat height when you are able to place your
heel on the pedal with an almost fully stretched leg. Do not lower
the seatpost below the minimum insertion length marked on the
post.
5. Tighten your seat bolts.
And you are good to go!
Adjust the seat height
Assembly
