8
To access the battery and the mA fuse remove the two screws holding the
Battery/Fuse Cover in place, and lift the cover from the meter.
To replace the mA fuse, pry it from its clips using a small screwdriver. A spare mA
fuse is located between the battery and the mA fuse.
mA Fuse:
Fast Blow 315mA/1000V, minimum interrupt rating 30 kA
(6.3 x 32 mm) (Amprobe
FP300)
To replace the 10 A fuse: 1) Remove the battery. 2) Remove the four rear-case
screws. 3) Separate the case. 4) Remove the 10 A fuse cover. 5) Remove and
replace the 10A fuse. 6) Re-install the fuse cover. 7) Reassemble the meter.
10A Fuse:
Fast Blow 10A/1000V, minimum interrupt rating 30 kA
(10 x 38 mm) (Amprobe
FP100).
Repair
All test tools returned for warranty or non-warranty repair or for calibration should be
accompanied by the following: your name, company’s name, address, telephone number,
and proof of purchase. Additionally, please include a brief description of the problem or the
service requested and include the test leads with the meter. Non-warranty repair or
replacement charges should be remitted in the form of a check, a money order, credit card
with expiration date, or a purchase order made payable to Amprobe
Test Tools.
In-Warranty Repairs and Replacement – All Countries
Please read the warranty statement and check your battery before requesting repair. During
the warranty period any defective test tool can be returned to your Amprobe
Test Tools
distributor for an exchange for the same or like product. Please check the “Where to Buy”
section on
www.amprobe.com
for a list of distributors near you. Additionally, in the United
States and Canada In-Warranty repair and replacement units can also be sent to a
Amprobe
Test Tools Service Center (see below for address).
Non-Warranty Repairs and Replacement – US and Canada
Non-warranty repairs in the United States and Canada should be sent to a Amprobe
Test
Tools Service Center. Call Amprobe
Test Tools or inquire at your point of purchase for
current repair and replacement rates.
In USA
In Canada
Amprobe
Test Tools Amprobe
Test Tools
Everett, WA 98203 Mississauga, ON L4Z 1X9
Tel: 888-993-5853 Tel: 905-890-7600
Fax: 425-446-6390 Fax: 905-890-6866
Non-Warranty Repairs and Replacement – Europe
European non-warranty units can be replaced by your Amprobe
Test Tools distributor for
a nominal charge. Please check the “Where to Buy” section on
www.amprobe.com
for a list
of distributors near you.
European Correspondence Address*
Amprobe
Test Tools Europe
P.O. Box 1186
5602 BD Eindhoven
The
Netherlands
*(Correspondence only – no repair or replacement available from this address.
European customers please contact your distributor)
.
Summary of Contents for 34XR-A
