background image

 
LIMITED WARRANTY 

 

Congratulations! Your new instrument has been quality crafted according to quality 

standards and contains quality components and workmanship. It has been inspected 

for proper operation of all of its functions and tested by qualified factory technicians 
according to the long-established standards of our company. 

 

Your instrument has a limited warranty against defective materials and/or workmanship 

for one year

 

from the date of purchase provided that, in the opinion of the factory, the 

instrument has not been tampered with or taken apart. 

 

Should your instrument fail due to defective materials, and/or workmanship 

during this one year period, a no charge repair or replacement will be made to 
the original purchaser. Please have your dated bill of sale, which must identify 

the instrument model number and serial number and call the number listed 

below: 

 

Repair Department 

ATP – Amprobe, TIF, Promax 

Miramar, FL 

Phone: 954-499-5400 

800-327-5060 

Fax: 954-499-5454 

Website: www.amprobe.com 

 
Please obtain an RMA number before returning product for repair. 

 

Outside the U.S.A. the local representative will assist you. Above limited warranty 

covers repair and replacement of instrument only and no other obligation is stated or 
implied. 

 

 

 
 

 

 

 

P/N: 7M1C-0671-0000 

Summary of Contents for AM-100
















Reviews: