Components and Operations
12
Plug the Kensington lock into the slot near primary battery and turn lock it. Both
the computer and battery are secured.
Kensington lock is a widely available 3
rd
party product.
Replacing Modules
Caution!
Turn OFF the power before replacing any module.
To remove the modules:
1.
Turn OFF the computer. (“Hibernate” or “suspend to disk” are not
recommended as the parameters may change when modules are changed.)
2.
Disconnect all cables from the computer.
3.
Use a coin to turn loose the screws on the modules.
4.
Remove the battery from the compartment.
5.
Remove the HDD from the computer.
To re-install the modules:
Gently push the module into the slot. Fasten the screw to fix the module. Make
sure the o-rings are firmly fixed. No sealant is necessary for the o-rings.
