Components and Operations
16
7.
USB port 3, 4 (proprietary sealed type)
8.
Serial port (COM2)
9.
DC jack
Stand Unit (optional)
Stand unit can hold the system unit and Docklight with adjustable view angle. It
can be used in office or in vehicle.
There are 2 configuration options:
-
Stand unit only to accept system unit.
-
Stand unit with Docklight hooked to accept system unit.
Mount Stand Unit
1.
Open the rubber cap on the docking connector.
2.
Align the computer into stand unit.
3.
Push the lever to engage and fix.
4.
Lock the computer.
Heater
Built-in heater and control circuit activates heating when computer is turned ON
at temperature 0
C~-20
C (32
F~-4
F).
The heating is automatically, just turn ON power the heater controller will detect
temperature and take over. The power indicator flashes while heating.
The computer would boot up when the internal temperature reaches safe level. It
may take 5~20 minutes depends on how cold the temperature is. For temperature
below –20
C (-4
F) the computer may never heat up.
Plug in AC or vehicle adapter for heating as battery power may become very low
at low temperature.
RF Device
When RF device connect/function as one of (GPS/Bluetooth/HSDPA/Wi-Fi)
started up, the RF led will be on, and then have to match up the "wireless
manager" application software to control the device "on/off".
