Maintenance/Service
53
MAINTENANCE/SERVICE
Cleaning
ALWAYS turn OFF the power, unplug the power cord and remove the battery
before cleaning.
The exterior of the system and display may be wiped with a clean, soft, and lint-
free cloth. If there is difficulty removing dirt, apply non-ammonia, non-alcohol
based glass cleaner to the cloth and wipe.
An air gun is recommended for cleaning water and dust. For salty water please
clean with fresh water then blow-dry with an air gun.
Troubleshooting
Should the computer fail to function properly, the troubleshooting steps below
may be followed.
-
Check AC/vehicle adapter, battery, and the power source.
-
Minimize the configuration, i.e. remove extra peripherals and devices.
-
Remove the modules one by one (HDD, CD-ROM, Battery, etc.).
-
Remove the software suspected.
-
Set BIOS fail-safe default.
-
Re-install operating system and application software.
RMA Service
If troubleshooting steps are unsuccessful, consult your dealer for RMA.
Shipping instructions:
1. Remove any personal add-on devices or other media.
2. Use the original shipping container and packing materials, if possible.
3. If the original packing materials are not available, wrap the equipment with
soft material (e.g. PU/PE form) then put the wrapped equipment into a hard
cardboard shipping box.
4. Include a sheet with the following information: (Note: Please keep a copy of
this sheet for your records.)
-
Name
