DM750-2MP User Guide
Page 7
Assembly
Attaching the Monitor
DM750-2MP-HDM11 models include a monitor which can be attached to the microscope’s stand. An arm is included
which should be attached to the stand’s 1.25” pillar. Secure the arm in place by using the locking knob before attaching
the monitor. The monitor’s rear panel has 4 threaded holes designed for VESA mounts. The arm’s mounting bracket only
uses the lower 2 holes. Use the included thumb screws to secure the monitor in place.
Attach one end of the included HDMI cable to the microscope’s HDMI port, and the other end to the monitor’s HDMI
port. Attach DC plug of the the monitor’s AC power adapter to the monitor’s power port, then plug the AC adapter into
a compatible AC outlet. The monitor’s power button is located on the lower portion of the bezel’s right side. Then the
monitor is powered on, the red LED on the lower-right corner of the front bezel will light up.
