American Security Products Co
Part #4305278
AMSEC Biometric Safe Lock Operating Instructions
02/10
15
12/11:34
8.6V
Enroll
New User
Press “Menu/OK” again.
12/11:34
8.6V
Place
Finger
Place your finger (different from the first one) on the fingerprint reader window and hold.
12/11:34
8.6V
Enrolling
12/11:34
8.6V
Checking
12/11:34
8.6V
ID: 02
Enrolled
The second fingerprint, with an ID No. 02, is enrolled successfully.
Note:
The first two enrolled fingerprints with ID No. 01 and 02 are administrators’
fingerprints.
Unlock by an administrator. Follow the same steps to enroll additional fingerprints.
17. Set/Change code (Level 1 & Level 3)
Unlock with the code (Level 1) or fingerprint (Level 3) which you want to set/Change
code. After successful verification, follow the same steps in 13. Set/Change the first code
for quick start (Level 1).
Note:
User code can be set or changed only after being enabled. (Level 3)
Unlock by an administrator. When the LCD screen shows “Select Menu”, press “
”
or “
” to select “Enable User Code” and press “Menu/OK”.
Press “
” or “
” to select the ID No. of user (For example: ID No. 03 user code) to
be enabled and press “Menu/OK”.
When the LCD screen shows “ID No.: 03 Code Enabled”, the No. 03 user code is
enabled successfully.
18. Set time delay (Level 1 & Level 3)
Unlock by an administrator. After successfully verification, follow the same steps in 4 (Set
time delay in Level 2).
19. Unlock by an enrolled user (Level 1 & Level 3)
Press “
Code” and enter an enrolled code. Or place an enrolled fingerprint on the
