AMSEC BSL-0601A-W Operating And Installation Instructions Download

Page: 5 / 20

American Security Products Co

Part #4305278

AMSEC Biometric Safe Lock Operating Instructions

02/10

1. Enroll the first fingerprint and its bound code for quick start (Level 2)

Install Battery: In the back of entry pad, you will find a battery case. Install a brand new
9V alkaline battery.

12/11:34

8.6V

Capacity: 30 Users
Used: 00 User(s)
9.20071105-23

12/11:34

8.6V

Enroll

New User

12/11:34

8.6V

Place

Finger

Place your finger on the fingerprint reader window and hold.

12/11:34

8.6V

Enrolling



12/11:34

8.6V

Checking



12/11:34

8.6V

ID: 01

Enrolled

Note: Hold your finger on the reader window until the above displays finish one by one.

The first fingerprint with an ID No. 01 is enrolled.

12/11:34

8.6V

New Code

Enter a code (10 digits).

12/11:34

8.6V

Repeat

Enter the same code again.

12/11:34

8.6V

ID: 01

Code Saved

The first fingerprint and its bound code with ID No. 01 are enrolled successfully.

Note: The default password (1234567890) will be deleted automatically after the first
fingerprint and code are enrolled successfully.

2. Enroll the second fingerprint and its bound code (Level 2)

Place the first enrolled finger on the reader window and hold.

12/11:34

8.6V

Verifying



12/11:34

8.6V

ID: 01

Verified

12/11:34

8.6V

Enter Code

Enter the code (ID No. 01).

Summary of Contents for BSL-0601A-W





















Search results

Summary of Contents for BSL-0601A-W

Reviews:

Related manuals for BSL-0601A-W

Brands by name

Popular brands

AMSEC BSL-0601A-W, Operating And Installation Instructions

Search results

Summary of Contents for BSL-0601A-W

Reviews:

Related manuals for BSL-0601A-W

Brands by name

Popular brands