7
User Administration
Adding Users
(restricted to managing user levels)
1.
Login.
2.
Press “3” (Admin).
3.
Press “2” (Users).
4.
Press “1” (Add).
5.
Select User Profile with softkeys.
6.
Press ENTER/SAVE key.
7.
Select login type with softkeys (key/PIN, PIN only, key only).
8.
Press ENTER/SAVE key.
9.
If applicable, you will be asked to present the key to the key reader.
10.
Enter username.
11.
Press the ENTER/SAVE key.
If you enroll a new key/PIN user, the user will be enrolled with an initial PIN of
1,1,1,1,1,1. If you enroll a PIN-only user, the initial PIN will be their two digit user
number followed by six 1’s (X,X,1,1,1,1,1,1). The user will be required to enter a new PIN
upon first login. PINs that are in use by another user or that are deemed too simple will
not be allowed.
Users can also be enrolled with the use of a PC application called ESLConfig.
Editing a User’s Profile
(restricted to managing user levels)
1.
Login.
2.
Press “3” (Admin).
3.
Press “2” (Users).
4.
Press “2” (Edit).
5.
Use
¬
and
®
softkeys to scroll to find the user you wish to edit.
6.
Press the ENTER/SAVE Key to select the user.
7.
Select a user profile using the
¬
and
®
softkeys.
8.
Press the ENTER/SAVE Key.
9.
Select a user login type.
10.
Press the ENTER/SAVE key.
11.
Present the user’s Dallas key to the reader (if applicable).
12.
Edit the username.
13.
Press the ENTER/SAVE key
Deleting a User
(restricted to managing user levels)
1.
Login.
2.
Press “3” (Admin).
3.
Press “2” (Users).
4.
Press “3” (Delete).
5.
Use the
¬
and
®
softkeys to scroll to find the user you wish to edit.
6.
Press the ENTER/SAVE key to select the user.
