SafeWizard
Operating Instructions
American Security Products Company
Last Revision 10/17/2008
Page 32 of 73
Document 4305199
Chapter 3-2-1-2
Access Control-
Door Access-
Time Delay Settings
Time Delay Settings is used to configure the appearance of the display during a time delay period.
3-2-1-2.1 Door Access Control Menu
Door Access Control
1 Time Delay Doors
2 Time Delay Settings
3 Timelock Settings
4 Immediate Lock
5 Dual Control
From the Door Access Control Menu, select 2 for Time Delay
Settings.
3-2-1-2.2 Time Delay Doors Screen
Time Delay for
Display Counter Y
Delay Count UP
Open Count DOWN
Display Mode LARGE
Open Period Alert N
QUIT To Continue
Display Counter: A “Y” in this field indicates that a counter will display
during a time delay, and an “N” indicates that the screen will be blank
during a time delay.
Delay Count: This field indicates the direction a time delay will be
displayed. “UP” would be from 1 up to the required number and
“DOWN” would be from the required number to 0.
**NOTE**
The default Delay Count Setting is “UP” for security purposes. If a robber is looking at the safe during the
time delay period, knowing the amount of time they would have to wait is to their advantage. An upward
count could be counting to any amount of time.
3-2-1-2.3 Time Delay Doors Screen
Time Delay for
Display Counter Y
Delay Count UP
Open Count DOWN
Display Mode LARGE
Open Period Alert N
QUIT To Continue
Open Count: This field indicates the direction an open count will be
displayed. “UP” would be from 1 up to the required number and
“DOWN” would be from the required number to 0.
Display Mode: The display mode sets the size that the display counter
will be, if displayed.
Open Period Alert: This setting indicates whether a sound is made
when the delay period has expired.
Summary of Contents for SafeWizard
Page 1: ......
