SafeWizard
Operating Instructions
American Security Products Company
Last Revision 10/17/2008
Page 37 of 73
Document 4305199
Chapter
3-2-2
Access Control-
Daylight Savings
By default the Daylight Savings is factory
Enabled
.
3-2-2.1 Access Control Menu
1 Door Access
2 Daylight Savings
3 Holidays
4 Penalty Lockout
5 PIN Life
6 Entry Doors
7 Man Trap Doors
QUIT
From the Access Control Menu, select 2 for Daylight Savings.
Note: Access to this screen requires permission only available to an
Administrator or Super User.
3-2-2.2 Daylight Savings Screen
D/L Saving
Enabled
Starts on the 2nd
SUN in MAR at 02:00
Next Event 03/11/2007
Ends On the
1st
SUN in NOV at 02:00
Next Event 11/04/2007
NO: Disable QUIT: Save
If this SafeWizard is located somewhere that does not participate in
Daylight Savings, then it is important for this feature to be turned off.
After Selecting this screen, the cursor will be located under the last
word in line 2. Press the
UP
key to move the cursor up to the first
line. Press the
NO
key to change to “
Disabled
.” Press the
QUIT/SAVE
key to save. Then press
MENU
and
QUIT/SAVE
to exit
to the
LOCKED
screen.
Future Daylight Savings Date Changes
The following is only required if there is a change from the current Daylight Savings schedule.
There are two changes that can be made in the event there is a change to Daylight Savings in the future.
First, is which Sunday of the month and second is which month. This applies to either Spring or Fall or
both.
Changing which Sunday:
Press the
DOWN
key to move the cursor to the second “Starts” or fifth “Ends” line. Press the
NEXT
key
or B
ACK
key to move to the desired Sunday of the same month.
Changing which Month:
Press the
DOWN
key to move the cursor to the third line or sixth line. Press the
NEXT
key or
BACK
key
to move to the desired month.
After all changes have been made, press
QUIT/SAVE
key to save.
Then press
MENU
and
QUIT/SAVE
to exit to the
LOCKED
screen.
Summary of Contents for SafeWizard
Page 1: ......
