<14>
Functional Specifications:
Note: All specifications subject to change at the whim of our overloads.
Time
,
Feedback
,
Rate
and
Amount
control range all extended with the
use of Expression Pedal or control voltage input.
Delay Time
: 35mS – 700mS Bucket switch down (all BBDs),
17.5mS – 350mS with switch up. 24mS – 900mS with LFO or
Control Voltages
Feedback:
0 to greater than infinite. Capable of self-oscillation.
Rate:
LFO RATE, from 0.08Hz to 40Hz (75Hz with CV control)
Amount:
LFO depth control from OFF to 56% of TIME sweep.
Drive:
up to +23dB of control or level matching.
Mix:
Center 50%. Adjust from near 100% wet to -44dB dry
Tone:
~605Hz center tilt like filter. Center = Flat to 0.25dB
High +5dB - -12dB, Low +4dB - -7dB.
Bucket Toggle:
1 or 2 BBDs (4096 or 8192 buckets)
LFO toggle
: Rounded Triangle, slewed Square wave or OFF
Bypass Footswitch:
effect on/off user selectable True Bypass or
JFET Buffered
Tails/Mod Footswitch:
User selectable modulation kill or engage
tails bypass (sometimes called Spillover).
Expression Switch:
4 position rotary selects Time, Feedback,
Rate or Amount controlled by expression pedal. Time is bi-polar
modulation (0V=-50%, 5V=+50%) all others are additive control.
Under the hood switches:
(Accessible by removing ADG-1 Cover)
True Bypass / Buffered bypass:
Selects between true bypass and
classic JFET buffered bypass
2nd Stomp Switch function:
Selects if 2
nd
stomp switch
enables/disables modulation or is Tails mode.
