Model professionally assembled and finished by Mike Wherry
International Hobbycraft (UK) Ltd.
21 St. Thomas St.
Bristol BS1 6JS England
Contents include: All plastic pieces to complete
model, metal axles and pictorial instructions
describing assembly. Paint and glue not included.
S K I L L
N I V E AU
N I V E L
1
round2models.com collectormodel.com
Round 2, LLC
4073 Meghan Beeler Ct.
South Bend, IN 46628
Ghostbusters and Christine TM & ©2013 Columbia Pictures Industries, Inc. All rights reserved. GENERAL MOTORS Trademarks
used under license to Round 2, LLC. Back to the Future ™ & © Universal Studios and U-Drive Joint Venture. POLAR LIGHTS, MPC,
AMT and design, and ROUND 2 and design are trademarks of Round 2, LLC. ©2013 Round 2, LLC, South Bend, IN 46628 USA.
Product and packaging designed in the USA. Made in China. All rights reserved.
ASSEMBLY MANUAL
POL914/12
1/25 scale model kit
Assembly:
Carefully study and understand the
entire instruction sheet. Compare the parts in the box
to the instruction sheet to be sure you have received
all the parts required. Carefully remove parts from
trees. If subassemblies and components are painted
do so before any parts are attached. Use only cement
and paint made for styrene plastic.
Painting:
Painting is optional and is not required
to complete kit.
Wash parts thoroughly with mild soap
and water. Parting lines, glue joints, and sharp edges
should be sanded or filled with filler putty designed for
plastic. Apply a "primer" coat and allow to dry. Check
parts for imperfections and repeat the procedure if
necessary. Remove any lint or dust. Apply paint
evenly, in several thin coats rather than one heavy
coat. Allow each coat to thoroughly dry before the next
is applied. Each coat should be carefully “wet
sanded” using slightly damp No. 1200 sandpaper. Be
careful not to remove any detail while sanding.
Lightest colors should be painted first. Use frosted
tape to mask off areas not to be painted. Remove tape
after paint is dry to the touch. Use a very fine brush to
touch up edges.
STICKERS:
See back of instruction sheet for
proper application.
ECTO-1 INFORMATION
WHAT COULD BE MORE APPROPRIATE FOR CHASING
GHOSTS THAN A BLOCK-LONG ‘59 CADILLAC
AMBULANCE, SPECTACULARLY OUTFITTED WITH
ECTOPLASMIC SURVEILLANCE, DETECTION AND STORAGE
EQUIPMENT FOR THE ETHERIAL BOGIES? PLUS, ENOUGH
FLASHING LIGHTS TO LIGHT UP A SMALL TOWN?
WHY, NOTHING ELSE EVEN COMES CLOSE - IT IS THE
PERFECT VEHICLE FOR THIS SPOOKY JOB. WHETHER IT’S
SLIME IN YOUR REFRIGERATOR OR DANCING FURNITURE
OR REAL GHOSTS IN YOUR TV, THE ECTO-1 IS ALWAYS ON
CALL. AND WHO ARE YOU GONNA CALL?
GHOSTBUSTERS, THAT’S WHO! THEY BELIEVE YOU.
P914-200
STICKER
STICKER
NEW YORK
STICKER
X2
STICKER
X4
STICKER
NEW YORK
Last Touches.
Add the Ghostbusters™ stickers to the front doors and the
rear of the vehicle along with the Hubcap emblem stickers.
Place ECTO-1 license plates on the front and the rear.
STEP 4
STEP 4
Look for these and other great kits from
AMT750
Ghostbusters™
ECTO-1A
POL911
Back to the Future™
Time Machine
AMT801
Christine
1958 Plymouth Fury
For more information, visit:
round2models.com
visit our blog at:
collectormodel.com