Effect Blocks
33
Tremolo
Tremolo is an amplitude modulation effect controlled by a low-frequency oscillator (LFO).
It’s like someone would turn the volume of the amplifier up and down creating pulsations.
•
Intens:
Sets the intensity of the effect. When set to maximum the sound completely
fades out between the pulses.
You can assign a controller to this parameter. Use
Tremolo Inten
as destination.
Range: 0 to 127.
•
Rate:
Sets the
Rate
of the low-frequency oscillator (LFO), making the effect slower or
faster. You can also press
Edit
button repeatedly at any time to tap the
Rate
or use a
controller with destination set to
Tremolo TAP
. To gradually change the
Rate
with a
controller use
Tremolo Rate
as destination.
Range: 0 (0.048 Hz) to 127 (14.5 Hz).
•
LFOdist:
Lets you choose LFO curve from sine to square or anything in between.
Range: 0 (sine) to 127 (square).
•
Type:
Gives you two options to choose from:
Mono
and
Stereo
. The latter can be used
to emulate Leslie rotating speaker effect.
•
TAP:
Defines the multiplier for
Rate
tapping.
It can be set to:
•
1/1:
The
Rate
is set as you tap it
•
1/1.5:
Sets the
Rate
to a dotted 8th note when tapping quarters
•
1/2:
Sets the
Rate
to an 8th note when tapping quarters
•
1/3:
Sets the
Rate
to a dotted 16th note when tapping quarters
•
1/4:
Sets the
Rate
to a 16th note when tapping quarters
Time
Gain (dB)
Sine Tremolo
Time
Gain (dB)
Square Tremolo
