29
Unplug the adapter and take out the battery. Disconnect as
well if there are any external devices connected (like CD-
ROM or flash drive)
Pour out the water that got inside the computer and use a
soft cloth to remove the stain to avoid any more damage
Use the fan to dry the whole system and any peripheral
then send it to the closest service center for experienced
personnel to diagnose and repair. This will reduce the
damage to the system
As a special reminder, be sure not to put the computer
inside the carry bag that has stain in sending the computer
for repair
The UMPC could not resume after it enter the Standby
mode
Solution:
Standby Mode – allows the computer or program save into
the RAM. The system will enter the saving mode. Press
any key to resume the system
Hibernate Mode – allows the computer or program save
into the HDD. At this time the power is completely turn off.
Press any key to resume the system
The system can’t resume operation
Solution:
Malfunction of external memory or internal memory – an
error will occur during saving into the system memory, it
will not execute normal operation
External peripheral connected to the system not
compatible – such as external USB devices, compact flash,
MMC, Smart Media are complicated devices will easily
cause the computer to enter standby mode thus unable to
resume operation
Un-suitable program or driver – any un-suitable driver
could cause any extension file like .dll, .sys and .exe would
not allow the system to enter standby or hibernate mode
Summary of Contents for U560
