www.amtren.com
Page 11
The Top Button on the Disc
Printer controls power. This
button can be used to RESET
the Printer.
The lower button is to operate
the Disc Tray. This is normally not
required unless you print labels
manually from Discus.
1.8 Printer LED Status Codes
The Disc Printer powers up automatically, you do not need to press any buttons.
Blink Pattern
Status
Solution
Top: Steady Green
Bottom: Steady Yellow
All OK. Printer is on, cartridges
are detected
Top: Blinking Green
Bottom: Off
Printer is preparing to print or is
printing.
Top: Steady Green
Bottom: Yellow 2 Blink Pattern
Cartridges are not detected.
Install Ink Cartridges. Confirm that the protec-
tive tape was removed, but DO NOT remove
the silver label from the bottom of the car-
tridges.
Top: Steady Green
Bottom: Yellow 3 Blink Pattern
Incorrect cartridges are de-
tected.
Verify the proper cartridges are installed.
Avoid direct sunlight or bright desk lamps right
by the machine. Normal overhead fluorescent
are lights are fine.
Top: Steady Green
Bottom: Other Yellow Blink
Pattern
Error printing.
Remove all jobs in the print queue of the
printer in the Printers & Faxes folder.
Cycle printer’s power by unplugging power
from the printer for a few seconds.
Top: Blinking Green
Bottom: Blinking Yellow
Error with printing mechanism.
Check for any foreign objects inside the
printer. Cycle power by unplugging power
from the printer for a few seconds.