www.amtren.com
Page 3
1.2 Attach Spindles & Remove Tape
Please install the input and output spindles that were packaged in the accessory pack as
shown below.
Printer
Controls
Reject
Disc Area
Disc Input
Blank media and
masters will go
here between the
three (3) input
spindles. Unit
holds 200 discs.
Disc Output
Burned discs and
masters are placed
here. Will hold
200discs.
Screw each of the
three (3) input spin-
dles into each outer
hole.
Screw the output
spindle down
over the bolt
Remove the tape from
the printer door and
pickarm