www.amtren.com
Page 5
1.4 Connect the Cables and Apply Power
Plug the Firewire© cable that is connected to the back of the FlexWriter unit into a Firewire© port on
your PC.
Plug the USB cable into the connector labeled “USB to PC” located on the rear of the FlexWriter unit.
Connect the other end of the USB cable into available USB port on your PC.
Plug the power cord into the power supply of the FlexWriter, also located on the rear side. Plug into a
standard 115V AC outlet. Use of a common plug strip with AC filtering, as is common with most
high-end computers, is recommended for the FlexWriter.
NOTE:
If the unit is to be located in an area where the utility or power company experiences
frequent outages, utilizing a UPS is strongly recommended.
Plug the second power cord into the AC power adapter that was provided with the disc printer and
plug into a standard 115V AC outlet. Plug the other end into the power connector on the rear of the
printer.
Power
Connection
DC Module
USB Printer
Connection
Printer
Control
DIN Cable
1 USB to PC
Connection
Power Supply
Switch
AC Power
Connection
Firewire©
Connection