Item # _______________________________
Project _______________________________
Date _________________________________
Twin and Single Mid Line Fresh Water Urns
Heat Exchange Brewing System
Twin Models 7443, 7446, 74410
Single Models: 7413, 7416, 74110
Electric
Features:
• Fresh Water Brewing
Water used for brewing is fresh water that is heated in a coiled,
nickel-plated, copper heat exchange tube inside the urn. As water
passes through the heat exchanger coil it is heated to optimum
brew temperature.
• Durable Construction
All A.I.S.I. type 304, 18-8 stainless steel
• Constant Brew Temperature
Brew temperature varies less than 5ºF (3ºC) throughout spay over
• Automatic Coffee Agitation
Thoroughly mixes brewed coffee immediately after spray over
is completed
• Automatic refill of water compartment
Water compartment automatically refills and reheats as needed.
• Low water cutoff System
Protects heating elements from burn out, at start-up or in operation.
• Velvet Smooth Spray Arm
Teflon® coating on spray arm piston prevents liming and insures
smooth operation. Positive “stops” on spray arm for operator ease.
Easy to operate:
• Fully Automatic – Push Button Operation
Simply load brew basket with coffee, align spray arm over basket lid
hole and press brew start button.
• Adjustable Bypass valve on spray arm
Enables proper coffee extraction even with variable water conditions
• Dial Thermometer with color-marked brew zone.
• Thermostat adjustable from front
Knob on thermostat has four marked positions: Brew, Hold,
Night Standby and Off.
Serviceable
• Drain valve in bottom
• Control drawer with all electronic components is
accessible from side.
