Programming the PC Presenter
21
PC Presenter
M - Display available memory
Press
"M"
at the program/command prompt to display the amount of memory available in the PC
Presenter:
T - Long form list of stored keycodes
Press
"T"
at the program/command prompt to display a listing of the keycodes currently saved in
PC Presenter memory, in long form. A long form listing of keycodes contains the button code
number, the size of the saved keycode, and the keystrokes recorded. The following example
represents the keycode "Button 1" on button 128:
V - Display version and copyright info
Press
"V"
at the program/command prompt to display the firmware version number, and copyright
information, as shown in the example below:
Programming Transmitter Pushbuttons
The program the transmitter pushbuttons.
1.
Begin at a DOS prompt on the PC that is connected to the AXR-MSE.
2.
At the DOS prompt, enter program mode by selecting and holding the following keys on the
PC keyboard:
CTRL, then ALT then "." (period key).
3.
When these keys are released, program mode will be indicated by the following characters at
the DOS prompt:
The characters
"C:\>rem"
before the blinking cursor indicate that the PC Presenter is in
program mode, waiting for a command key.
C:\>rem Code : 128 Size : 24 bytes
C:\>rem Code : 129 Size : 24 bytes
C:\>rem Code : 130 Size : 24 bytes
PRGM EX. 7
C:\>rem Memory available : 60436 bytes
PRGM EX. 8
C:\>rem Code : 128 Size : 24 bytes
C:\>rem 32 F0 32 3C F0 2C 2C F0 2C 44 F0 44 31
PRGM EX. 9
C:\>rem Firmware version x1.001
C:\>rem Copyright AMX Corporation 2000
PRGM EX. 10
For PC keyboards with left and right <Ctrl> and <Alt> keys, only the left<Ctrl><Alt> "."
combination will work.
C:\>rem Press command key or transmitter button
C:\>rem
PRGM EX. 11
