AMX MAX Servers Operation/Reference Manual Download

Page: 5 / 80

Table of Contents

iii

MAX Servers: HT Home Theater and MMS Multimedia Servers

Online Tech Support ...................................................................................................... 41

Cover Art ......................................................................................................................... 42

Change Region ............................................................................................................... 42

Changing The Region Code Setting On Your MAX Server.................................................... 43

Update Firmware ............................................................................................................ 43

Scheduling Automatic Firmware Updates .............................................................................. 43

Manually Updating the Firmware ........................................................................................... 44

Restart MAX deamon ...................................................................................................... 44

Shutdown ....................................................................................................................... 44

Exit .................................................................................................................................. 44

Exit and Disconnect......................................................................................................... 44

DVD Region Code Settings ..............................................................................45

Overview ......................................................................................................................... 45

DVD Regions (1-6) .......................................................................................................... 45

Default Region Code Setting........................................................................................... 46

Changing the Region Code Setting on MAX Servers...................................................... 46

Changing the DVD Region Code Setting On MAX Servers ............................................ 47

MAX Servers DVD Drives - Supported Formats ...............................................49

DVD Drives - Compatible Formats .................................................................................. 49

MAX Servers - DVD Drives Used.................................................................................... 49

MDL Series - DVD Drives................................................................................................ 50

Replacing HDDs in MAX Servers ......................................................................51

Overview ......................................................................................................................... 51

Replacing HDDs in MMS Servers ................................................................................... 51

Step 1: Identify the Drive That Needs To Be Replaced ......................................................... 51

Step 2: Physical Removal and Replacement of the Drives ................................................... 54

Step 3: Rebuild the RAID Array ............................................................................................. 54

Step 4: Authenticate the New HDD........................................................................................ 55

a) Open a telnet session with the MMS server: ..................................................................... 55

b) Authenticate the new HDD:................................................................................................ 55

Replacing HDDs in HT Servers....................................................................................... 56

Step 1: Identify the Drive That Needs To Be Replaced ......................................................... 57

Step 2: Physical Removal and Replacement of the Drives.................................................... 57

Step 3: Add the New Drive to the System.............................................................................. 58

MAX Admin Menu ........................................................................................................... 59

Rack Mounting MAX Servers ............................................................................61

CAUTION: Safety Instructions......................................................................................... 61

Rack Mounting MMS-01S/02S/02SB/04S/12S Servers .................................................. 62

Summary of Contents for MAX Servers

















































































Search results

Summary of Contents for MAX Servers

Reviews:

Related manuals for MAX Servers

Brands by name

Popular brands

AMX MAX Servers, Operation/Reference Manual

Search results

Summary of Contents for MAX Servers

Reviews:

Related manuals for MAX Servers

Brands by name

Popular brands