Mio Modero® R-4 Remote
4
Mio Modero R-4
FCC Compliance
This radio module was tested and certified as a stand-alone device according to FCC Rules CFR 47, Part
15, Subpart C. If this device is installed in a manner such that the radio module FCC ID label is not
visible on the outside of the end product, a label must be placed on the end product with the following
statement:
This device complies with Part 15 of the FCC rules. Subject to the following two conditions:
1.
This device must not cause harmful interference and
2.
This device must accept all interference, including interference that interferes with the operation of
this device. "
The User Manual for the end-device must contain the following statements in a prominent place in the
manual.
"Modifications not expressly approved by the manufacturer will void the user’s authority to operate the
equipment."
Patents
This product is covered by the following patents:
AMX
U.S. Patent No. D 602,858
U.S. Patent No. D 520,495
U.S. Patent No. 7,786,623
This product employs or practices certain features and/or methods of one or more of the following
patents:
SIPCO, LLC
U.S. Patent No. 7,103,511
U.S. Patent No. 6,914,893
U.S. Patent No. 7,697,492
This device has been evaluated and found to be compliant with the FCC Rules for RF
Exposure when the device is operated at a minimum separation distance of 2 cm.
from the user and nearby persons. Operation of this device at closer distances
should be avoided."
