Protected Settings Menu
26
Mio Modero R-4
Checking the gateway IP address
1.
Select
Protected Settings
in the Setup Menu.
2.
Select
System Settings
in the
Protected Settings
Menu. The gateway IP is indicated on the second
page.
3.
Select the
Back
button until you are out of the Setup Menu.
Checking the Gateway EUI address
1.
Select
Protected Settings
in the Setup menu.
2.
Select
System Settings
in the
Protected Settings
Menu.
3.
Select the device’s down arrow to navigate to the second page. The Gateway EUI address is
indicated on the second page.
4.
Select the
Back
button until you are out of the Setup Menu.
Checking the Extended PAN ID
1.
Select
Protected Settings
in the Setup Menu.
2.
Select
System Settings
in the
Protected Settings
Menu.
3.
Select the device’s down arrow to navigate to the second page. The Extended PAN ID is indicated at
the bottom of the page, above the
Network Scan
and
ZigBee Statistics
buttons.
4.
Select the
Back
button until you are out of the Setup Menu.
Changing the Device Number
1.
Select
Protected Settings
in the Setup Menu.
2.
Select
System Settings
in the Protected Settings Menu.
3.
The
Device Number
button at the bottom of the first page lists the current NetLinx Device Number
for the unit.
4.
To change the device number, press the
Device Number
button to open the
Device Number
page.
5.
Enter the new device number with the device keypad.
To move the cursor back one number at a time, press the
Back
button.
To clear the entire device number field, press the
Clear
button.
To return to the
System Settings
page without saving any changes, press the
Abort
button.
To save any changes and return to the
System Settings
page, press the
Done
button.
6.
Reboot the Mio R-4 from the Reboot Page (see the
Reboot Page
section on page 29).
7.
Select the
Back
button until you are out of the Setup Menu.
In addition to the
Abort
button, should you decide not to change the Device Number
for any reason, press the
Back
button (FIG. 1) to return to the last page displayed.
