Programming
102
Modero G4 Touch Panels - Configuration and Programming
SIP Commands
The following table lists and describes SIP commands that are generated from the touch panel. SIP commands only
apply to Modero X/S Series G4 panels equipped with SIP functionality (excluding all "No Comm" panels).
SIP Commands
^PHN-AUTOANSWER
Provides the state of the auto-answer feature.
Syntax:
"'^PHN-AUTOANSWER, <state>'"
Variable:
state = 0 or 1 (off or on)
Example:
SEND_COMMAND Panel,"'^PHN-AUTOANSWER, 1'"
^PHN-CALL
Provides call progress notification for a call.
Syntax:
"'^PHN-CALL, <status>, <connection id>'"
Variables:
status = CONNECTED, DISCONNECTED, TRYING, RINGING, or HOLD.
connection id = The identifying number of the connection.
Example:
SEND_COMMAND Panel"'^PHN-CALL, CONNECTED, 1'"
Notifies that the call is connected.
^PHN-DECLINE
Decline (send to voice mail if configured) the incoming call on <CallID> as indicated from the
previous PHN-INCOMING message. CallID should be 0 or 1.
Syntax:
"'^PHN-DECLINE, <CallID>'"
Variable:
CallID = The identifying number of the connection.
Example:
SEND_COMMAND Panel,"'^PHN-DECLINE,0""
^PHN-INCOMING
Provides incoming call notification and the connection ID used for all future commands related
to this call. The connection id will be 0 or 1.
Syntax:
"'^PHN-INCOMING, <caller number>, <caller name>, <connection id>, <timestamp>,
'"
Variables:
caller number = The phone number of the incoming call.
caller name = The name associated with the caller number.
connection id = The identifying number of the connection.
timestamp = The current time in MM/DD/YY HH:MM:SS format.
Example:
SEND_COMMAND Panel,"'^PHN-INCOMING, 2125551000, AMX, 07/22/08 12:00:00, 1'"
^PHN-LINESTATE
Indicates the current state of each of the available connections used to manage calls.
Syntax:
"'^PHN-LINESTATE, <connection id>, <state>, <connection id>, <state>,...'"
Variables:
connection id = The identifying number of the connection.
state = IDLE, HOLD, or CONNECTED
extn = The local extension of this panel (see Example)
Example:
SEND_COMMAND Panel,"'^PHN-LINESTATE, 1, IDLE, 2, CONNECTED, SIP, <extn>'"
