Settings Pages
26
Modero G4 Touch Panels - Configuration and Programming
2.
Enter the new device name and press
OK
.
Power Management
The options on the
Power Management
page (FIG. 41) allow setting of display timeout and shutdown preferences.
G4 WebControl
The options on the
G4 WebControl
page (FIG. 42) allow you to enable or disable G4 WebControl functionality.
An on-board VNC (Virtual Network Computing) server allows the panel to connect to any remote PC running a VNC
client. Once connected, the client can view and control the panel remotely.
FIG. 40
Device Name keyboard
FIG. 41
Power Management page
Power Management Page
Display Timeout:
This value determines the number of seconds, minutes, or hours that need to pass before the
panel automatically goes into Sleep Mode. Once asleep, the device may be awakened by touching
the
Sleep
button on the top of the panel or the screen itself. Use the
Up/Down
arrows to change
the settings; a value of Off disables this feature.
Range = 10, 15, 20, 25, 30 seconds; 5, 15, 30 minutes; 1, 2 hours Default = Off
Panel Shutdown:
This value determines the number of seconds, minutes, or hours that need to pass before the
panel automatically shuts down. Use the
Up/Down
arrows to change the settings; a value of Off
disables this feature.
Range = 3, 5, 10, 15, 30 minutes; 1, 2, 3, 4 hours Default = Off
FIG. 42
G4 WebControl page