Settings Pages
30
Modero G4 Touch Panels - Configuration and Programming
Admin Configuration
The
Admin Configuration
page (FIG. 46) allows control of access to the
Settings
pages, passwords, security settings, and
the ability to install firmware or touch panel pages from various sources.
Admin Passwords
The options on the
Admin Passwords
page allow assignment of passwords required for users to access the secured
Settings
pages.
FIG. 46
Admin Configuration page
Admin Configuration Page
Configuration Protected:
Press this button to protect the
Settings
pages from access without a password.
Front Button Access:
Press this button to enable or disable the ability to access the
Settings
pages from the
Sleep
button (FIG. 1).
Note: If Sleep button access is disabled, the Settings page can be through the splash page,
as shown in the Accessing the Settings Page
section on page 3
. The Settings page may
also be accessed via Telnet, send command, or a preconfigured setup button on touch panel
pages.
Passwords:
Select this to access the
Passwords
page (page 30).
Security:
Select this to open the
Security
page (page 32).
Install Firmware:
Select this to access the
Install Firmware
page (page 33).
Install Pages from
External Disk:
Select this to install touch panel pages from an external disk, such as a USB stick. If an
external disk is not connected to the touch panel, this field will be disabled.
Reset Settings:
Select this to reset all settings and return them to the panel’s factory defaults.
Remove User Pages:
Select this to remove all currently loaded user pages from the panel.
FIG. 47
Admin Passwords page
