Settings Pages
36
Modero G4 Touch Panels - Configuration and Programming
4.
Once the upgrade is complete, the touch panel will automatically reboot with the new firmware.
5.
You may remove the USB stick from the USB A port once the dots in the splash page (FIG. 53) start moving. If you
do not remove the USB stick, the update initiation screen will appear again. At this point, do not touch the screen,
and the reboot will continue.
SIP
The options on the
SIP
page (FIG. 59) enable you to establish network settings for using your touch panel as an IP
phone. With a CSG SIP Communications Gateway (
FG2182-01, -02, -03
), you can use your touch panel to make and
receive local, long distance, and international phone calls, and have access to phone features like call waiting, caller ID,
call forwarding, call queuing, and voice mail. Setting up your touch panel as a telephone requires that you set it up as one
in the CSG SIP Communications Gateway.
Refer to the
CSG SIP Communications Gateway Operation/Reference Guide
for information on setting up your touch
panel to work as a telephone.
You may need to load a Duet module to enable the touch panel to receive SIP calls.
The Duet module translates between the standard interface and the device protocol. It parses the buffer for responses
from the device, sends strings to control the device, and receives commands from the UI module or telnet sessions. Refer
to the documentation supplied with the Duet Module for more details.
FIG. 58
Upgrade In Progress screen
FIG. 59
SIP page
A sample UI module is provided in the module package. It is not intended to cover every
possible application, but can be expanded as needed by a dealer to meet the require-
ments of a particular installation.
SIP Page
SIP:
This option enables the SIP Stack on startup. If you disable this option, the panel will not
attempt to read the rest of the configuration and will not register with a proxy server.
However, point-to-point SIP will still be enabled allowing for existing intercom functionality.
Status:
This option displays whether you are connected to the proxy server.
Proxy Address:
This option enables you to enter the IP address or DNS name of the proxy server used as the
SIP gateway.
Port Number:
The option displays the port you use to connect to the proxy server. The standard SIP port is
5060, but some providers use different ports.
