MXA-MP and MXA-MPL Programming
52
Modero G4 Touch Panels - Configuration and Programming
4.
When finished, click
OK
and then
Close
to close the Resource Manager.
5.
After adding the Dynamic Image, assign the image as a Bitmap to a button on a touch panel page.
Adding a Live Motion Stream To A Touch Panel Page via an MXA-MPL
To add a live motion stream to a touch panel page via an MXA-MPL:
1.
In the touch panel page, draw a button to be the video window.
2.
In
Button Properties
, select
MXA-MPL
as the video fill (FIG. 75).
Commands Through the Command Output Loopback Port (MXA-MPL Only)
If embedding them in TPDesign, send commands involving the MXA-MPL can be sent through the Command Output
Loopback Port. In the
Button Properties
window, this may be found under the
Programming
tab.
The touchpanel file attachment example in FIG. 76 below has examples of preview and streaming windows, as well as a
page to give examples of switching resolutions and signal types.
FIG. 74
Edit Dynamic Image window
FIG. 75
Button Properties
Any video button that has displayed video but is no longer active will display a
snapshot of the last frame displayed.