Setup Pages
44
MVP-5200i Modero® ViewPoint® Touch Panel with Intercom - Instruction Manual
Setup Pages
Overview
The MVP-5200i features on-board Setup pages. Use the options in the
Setup
pages to access panel information and make various
configuration changes.
To access the
Setup
pages, press the center button of the navigation wheel and hold for 3 to 5 seconds (FIG. 47).
Setup Page
The
Setup
page (FIG. 48) allows quick access to several essential panel properties:
Features on this page include:
FIG. 47
Setup Page Access buttons
FIG. 48
MVP-5200i main Setup page
Setup Page
Navigation Buttons:
The buttons along on the left side of the page provide access to secondary Setup pages (see following sections).
WiFi/Wired/USB Icon:
The icon to the left of the Connection Status Icon displays whether the current connection to the Master is
Wireless
(image of a radio antenna),
Wired
(image of three networked computers), or
USB
(USB connection
symbol).
Connection Status icon: The icon in the upper-right corner of each Setup page provides a constant visual indication of current
connection status.
Note: a Lock appears on the icon if the panel is connected to a secured NetLinx Master.
Connection Status:
Displays whether the panel is has external communication, as well as the encryption status of the Master, the
connection type (
Ethernet or USB
), and to which System the panel is connected.
• Until a connection is established, the message displayed is: “
Attempting via Ethernet
” or "
Attempting via
USB
".
• When a connection is established, the message displayed is either: “
Connected via Ethernet
“or “
Connected
via USB
“.
• The word “
Encrypted
” appears when an encrypted connection is established with a NetLinx Master.
Note: The panel must be rebooted before incorporating any panel communication changes and to detect Ethernet
connections.
Setup Page Access button:
Press and hold for 3 to 5 seconds to access the Setup pages.
