Protected Setup Pages
53
MVP-5200i Modero® ViewPoint® Touch Panel with Intercom - Instruction Manual
NOTE:
When the Function Show feature is displayed, the Channel Port and Code will appear in yellow, the Address Port and Code in
green, and the Level Port and Channel Code in purple.
To reboot the panel:
1.
Access the
Protected Setup
page.
2.
Press the
Reboot
button.
3.
Wait until the panel completes its reboot.
4.
Log back into the
Protected Setup
page, if necessary.
To shut down the panel:
1.
Access the
Protected Setup
page.
2.
Press the
Shutdown
button.
3.
Disconnect any power source plugs or USB connections, if necessary.
Security Settings
The
Security
button on the
Protected Setup
page has three settings:
Standard
,
Secure
, and
DoD
. Pressing the button opens the
Panel Security Setting
popup window (FIG. 57)
Each of the settings has different features for touch panel security:
Protected Setup Page (Cont.)
System Recovery:
•
Reset System Settings
- Deletes all of the current configuration parameters on the panel (including IP
Addresses, Device Number assignments, Passwords, and other presets). This option invokes a
Confirmation dialog, prompting you to confirm your selection before resetting the panel.
•
Remove User Pages
- Removes all TPD4 touch panel pages currently on the panel, including the pre-
installed AMX Demo pages. This option invokes a Confirmation dialog, prompting you to confirm your
selection before removing the panel pages.
Note that the
YES
button on the Confirmation dialog is disabled for 5 seconds as additional protection
against accidentally resetting the panel or removing the panel pages.
FIG. 56
Function Show example
FIG. 57
Panel Security Setting popup window
Security Profile Features
Standard: • Factory default, shipped in this configuration.
• Default Protected Setup Password is “
1988
”.
• Remote login uses Telnet.
Secure:
• Default Protected Setup Password is “Amx1234!”.
• Minimum password requirement is 8 characters with at least one numeric character.
• Remote login uses SSH.
• Remote login user name is “
amx
”.
• Login failure attempt pauses 4 seconds before another login attempt is allowed.
• After 3 consecutive unsuccessful SSH login attempts, login lockout is enabled for 15 minutes.
• Login and logout audit logging is enabled.
Channel Code
0.20
0,8
0,50
Channel Port
Address Port
Address Code
BUTTON
Level Port
Channel Code
