Protected Setup Pages
64
MVP-5200i Modero® ViewPoint® Touch Panel with Intercom - Instruction Manual
Refer to the
EAP Authentication
section on page 136 for further details on these security options.
Refer to the
Using the Site Survey Tool
section on page 30 for more information on using this feature.
Client Certificate Configuration
A client certificate can be configured by an IT department in several ways. The client certificate and private key can both be
incorporated into one file or split into two separate files. In addition, the file format used by these files could be PEM, DER, or
PKCS12. These formats are described later in this section. The following table describes how to fill in the fields for each possible
case.
AMX supports the following security certificates
PEM (Privacy Enhanced Mail)
DER (Distinguished Encoding Rules)
PKCS12 (Public Key Cryptography Standard #12)
NOTE:
PKCS12 files are frequently generated by Microsoft certificate applications. Otherwise, PEM is more common.
Certificate files frequently use 5 file extensions. It can be confusing because there is not a one to one correspondence. The
following table shows the possible file extension used for each certificate type:
Please note which certificate types are supported by the different certificate fields used on the configuration screens (PEAP, TTLS,
and TLS). The following table outlines the firmware fields and their supported certificate types.
EAP-TLS (Cont.)
Client Certificate:
Opens an on-screen keyboard for entering the name of the file containing the client (panel) certificate for use in
certifying the identity of the client (panel).
• Refer to the
Client Certificate Configuration
section on page 64 for information regarding Client Certificates and
their parameters.
Private Key:
When pressed, the panel displays an on-screen Client Private Key File Location keyboard for entering the name of
the file containing the private key.
• Use the on-screen keyboard’s
Clear
button to completely erase any previously stored network path information.
Private Key
password:
This field should only be used if the Private Key is protected with a password. If no password protection is
associated with the Private Key, then this field should be left
blank
.
• When pressed, the panel displays an on-screen Private Key Password keyboard which allows you to enter an
alpha-numeric password string.
• Use the on-screen keyboard’s
Clear
button to completely erase any previously stored network path information.
Cancel/Save:
• Cancel - discard changes and return to the previous page.
•
Save
- store the new security information, apply changes, and return to the previous page.
Client Certificate Configuration
Certificate Configuration
Client Certificate Field
Private Key Field
Single file contains both the client certificate and the private key.
Format is: PEM or DER.
Enter the file name
Enter the same file name
First file contains the client certificate, second file contains the private key.
Format is: PEM or DER.
Enter the first file name Enter the second file name
Single file contains both the client certificate and the private key.
Format is: PKCS12
Leave this field blank
Enter the file name
First file contains the client certificate, second file contains the private key.
Format is: PKCS12
Not supported
Not supported
Certificates and their Extensions
Certificate Type
Possible File Extensions
PEM
.cer
.pem
.pvk
DER
.cer
.der
PKCS12
.pfx
Certificate Types Supported by the Modero Firmware
Configuration Field Name
Certificate File Type Supported
Certificate Authority
field
PEM and DER
Client Certificate
field
PEM and DER
Private Key
field
.PEM, DER, and PKCS12
