Installing Wall-Mount (MXD) Panels
64
Modero X® Series G4 Touch Panels Instruction Manual
8.
Test the incoming wiring by attaching the panel connections to their terminal locations and applying power. Verify
that the panel is receiving power and functioning properly to prevent repetition of the installation.
9.
Latch the panel onto the hooks on the Backbox. Push in on the bottom snaps (Landscape) or on the right (Portrait)
gently but firmly until the snaps “click” to lock it down (FIG. 46)..
10.
Reconnect the terminal Ethernet and USB cables to their respective ports.
Do not disconnect the connectors from the touch panel. The unit must be installed
with the attached connectors before being inserted into the mounting surface.
FIG. 46
Installing the MXD-1000 / MXD-700
Mounting Surface
Backbox
Latch Hooks
Snaps
If a gap is observed between the panel and the Backbox, or feel any binding while
locking down the panel, stop immediately and verify that no cables or other items are
in the way. Do not force the panel into position, as this can cause damage to the
touch screen or the panel electronics.
Summary of Contents for MXD-430
