Installing Wall-Mount (MXD) Panels
67
Modero X® Series G4 Touch Panels Instruction Manual
6.
To reattach the panel to its Backbox, repeat the installation procedure.
Uninstalling the MXD-700
The MXD-700 is held in place to the Backbox via latch hooks and clips on the Backbox.
In certain circumstances, such as firmware updates or other maintenance that requires accessing the device’s USB port,
the device may need to be removed from the Backbox. The clips that lock down the MXD-700’s bottom edge
(Landscape) or right edge (Portrait) may be unlatched in order to remove the device from the mounting surface.
Removing the MXD-700 From Its Backbox
1.
The MXD-700 has three rows of ventilation holes along the molding (FIG. 48):
2.
On the bottom (Landscape) or right side (Portrait) of the MXD-700, locate the
fifth
ventilation holes from each
edge, on the row closest to the Backbox (FIG. 49): .
3.
With a stout, strong point (a push pin or straightened paper-clip, for example), carefully press into the access holes
in either end of the molding until the snap is disconnected.
For further information, refer to the video available at www.amx.com (go to
Newsroom > Videos > Touch Panels).
FIG. 50
MXD-700 Molding (highlighted in blue)
FIG. 51
Bottom View (Landscape) or Right-Side View (Portrait) of the MXD-700 showing access holes in molding
Molding
Molding
Access hole
Access hole
Panel (surface)
#5
#5
Summary of Contents for MXD-430
