Installing Wall-Mount (MXD) Panels
70
Modero X® Series G4 Touch Panels Instruction Manual
Installing the Backbox
FIG. 54 provides installation dimensions for the MXD-430:
Use the MXD-430 Installation Template (68-5968-05) to ensure proper placement.
1.
Prepare the area by removing any screws or nails from the drywall before beginning the cutout process.
2.
After ensuring proper placement, cut out the mounting surface for the Backbox using the MXD-430 Installation
Template as a guide.
3.
Thread the incoming Ethernet from their terminal locations through the surface opening.
FIG. 54
MXD-430 - Installation Dimensions (front view)
Notes:
Dimensions in parenthesis are in millimeters
Additional detailed installation and product drawings are available to view/download at www.amx.com
Using the included template to select the final placement of the Backbox is highly
recommended. The outside edges of the template are the same dimensions as the
touch panel, which allows you to troubleshoot possible conflicts with wall edges,
doors, and other potential obstacles.
Making sure the actual cutout opening is slightly smaller than the provided
dimensions is highly recommended. This action provides a margin for error if the
opening needs to be expanded. Too little wall material removed is always better than
too much.
Summary of Contents for MXD-430
